|
|
Post by McLellan on Nov 25, 2021 17:10:46 GMT
CTB has put a set on his bike recently, best I’ve seen in a long time.
|
|
|
|
Post by buster on Nov 25, 2021 18:12:14 GMT
|
|
|
|
Post by davefirestorm on Nov 25, 2021 18:26:49 GMT
Believe Tony has sourced a master cylinder,that’s good price for the calliper too although no picture of the piston side I’ll bet it’s seized 🙀😀
|
|
|
|
Post by davefirestorm on Nov 25, 2021 18:47:11 GMT
I asked the seller if piston was seized.
Here’s his reply:-
“To be honest I can’t remember but I have mentioned that it’s gonna need new seals all threads are good”
It’s seized 😂😂
|
|
|
|
Post by johnfcbn44dx on Nov 25, 2021 19:12:33 GMT
I've found it is normally the bleed nipple that is the most difficult on these calipers. a reasonable price though.
In the last picture is it 5/8" ie. CB400NB/NC/ND? (can't see "14" for the 250NDB)
|
|
|
|
Post by tonyrec on Nov 27, 2021 20:38:33 GMT
Thanks guys......I managed as David said, to source a new Master Cylinder so at least that that one ticked off. Thank you
|
|
