|
Post by BritPete on Dec 25, 2021 20:54:38 GMT
Fook me your right, another Beer barman ππΊπ In the Gentlemanβs bar tonight LB with Barmen Out into the hall and get those wenches topping you up as you drink
|
|
|
Post by The Great High Lord Beer on Dec 25, 2021 21:09:46 GMT
I'll need it, this is getting all complicated, prepare the shots ππ
|
|
|
Post by BritPete on Dec 25, 2021 21:27:35 GMT
I'll need it, this is getting all complicated, prepare the shots ππ Chilli πΆ schnapps for me tonight
|
|
|
Post by The Great High Lord Beer on Dec 25, 2021 22:11:49 GMT
Aha, so Sir Pete, by thy under the influence, if this be so, nip out to thy garage and fetch me a few bits, rhs fork leg, 400 engine and carbs and cdi, and a packet of pickled onion monster munch, good man πππΊ
|
|
|
Post by comstar on Dec 26, 2021 1:03:31 GMT
Aha, so Sir Pete, by thy under the influence, if this be so, nip out to thy garage and fetch me a few bits, rhs fork leg, 400 engine and carbs and cdi, and a packet of pickled onion monster munch, good man πππΊ I'd push for those NOS genuine headers too whilst the opportunity is there.
|
|
|
Post by BritPete on Dec 26, 2021 8:05:15 GMT
Aha, so Sir Pete, by thy under the influence, if this be so, nip out to thy garage and fetch me a few bits, rhs fork leg, 400 engine and carbs and cdi, and a packet of pickled onion monster munch, good man πππΊ I'd push for those NOS genuine headers too whilst the opportunity is there.Β Β HoHoHo
|
|
|
Post by BritPete on Dec 26, 2021 8:17:59 GMT
Close up of NC Twin Pot Calipers I replaced the discs with a set from Germany, this is the originals with 40K miles of wear The wear area on the discs sent will be within those groves so OK
|
|
|
Post by BritPete on Dec 26, 2021 8:19:39 GMT
PS
I think the Twin Pot Calipers look far better that the NB and earlier ones - but that will no doubt spark a debate for Boxing day
|
|
|
Post by johnfcbn44dx on Dec 26, 2021 10:40:19 GMT
That is another item to list for the conversion 5 in No M8 x 94 (95)mm brake disc securing bolts, the 250 ones are slightly shorter, (perhaps with 5 new locking flange nuts).
|
|
|
Post by BritPete on Dec 26, 2021 14:55:49 GMT
Would that depend on the front wheel John as the early 400s the discs were bolted to the wheel either side like he left 250 one?
|
|
|
Post by johnfcbn44dx on Dec 26, 2021 20:44:56 GMT
Would that depend on the front wheel John as the early 400s the discs were bolted to the wheel either side like he left 250 one? Yes, tapped hubs and M8x 33mm on the most of the earlier wheels upto the NB, and I see on the parts book the through bolting is listed on the NC front wheel, but still lists the tapped hub for the 400NB which has me confused. I will have to look at a gold front wheel again... I'm assuming it is a CB250NDB black reverse comstar MT2.15 X19, that the discs are being fitted to which would have 5 in No M8x90mm and would need M8x94mm for twin discs...
|
|
|
Post by BritPete on Dec 26, 2021 21:22:54 GMT
Would that depend on the front wheel John as the early 400s the discs were bolted to the wheel either side like he left 250 one? Yes, tapped hubs and M8x 33mm on the most of the earlier wheels upto the NB, and I see on the parts book the through bolting is listed on the NC front wheel, but still lists the tapped hub for the 400NB which has me confused. I will have to look at a gold front wheel again... I'm assuming it is a CB250NDB black reverse comstar MT2.15 X19, that the discs are being fitted to which would have 5 in No M8x90mm and would need M8x94mm for twin discs... MKW had through bolts
|
|
|
Post by johnfcbn44dx on Dec 26, 2021 22:13:57 GMT
Yes, tapped hubs and M8x 33mm on the most of the earlier wheels upto the NB, and I see on the parts book the through bolting is listed on the NC front wheel, but still lists the tapped hub for the 400NB which has me confused. I will have to look at a gold front wheel again... I'm assuming it is a CB250NDB black reverse comstar MT2.15 X19, that the discs are being fitted to which would have 5 in No M8x90mm and would need M8x94mm for twin discs... MKW had through bolts I'm sure my gold 400NB also has through bolts....but that parts book put 0.1% doubt in my mind .
|
|
|
Post by buster on Dec 27, 2021 10:11:39 GMT
just looked on ebay and this is at the top of my home page (screenshot) give me a shout if you decide you want it
|
|
|
Post by The Great High Lord Beer on Dec 29, 2021 19:32:50 GMT
PM sent good Sir ππΊ
|
|