|
Post by BritPete on Nov 15, 2020 15:42:18 GMT
This is a slow job
|
|
|
Post by BritPete on Nov 15, 2020 15:46:39 GMT
|
|
|
Post by grahamb on Nov 15, 2020 15:54:06 GMT
4 minutes , Are they in good enough nick to be used again. ?
|
|
|
Post by buster on Nov 15, 2020 17:28:41 GMT
bloody hard work, I lost the plot a bit with mine
|
|
|
Post by tucksie on Nov 16, 2020 8:06:37 GMT
That looks good Pete. I’ve started work on mine but left it for now.
|
|
|
Post by BritPete on Nov 21, 2020 15:26:20 GMT
Bit more progress - not happy with it yet And Unfortunately the Dremel burnt out so work stopped
|
|
|
Post by BritPete on Dec 19, 2020 14:26:12 GMT
What are the thoughts on this When stripped down the metal bridge was removed from the front Muddy and powder coated Question was how to re-join them as I am never going to be able to match the original rivets Came up with this Have used thin nuts on the inside and I will need to cut the pan-head flange hex thing bolts on the inside
|
|
|
Post by BritPete on Dec 19, 2020 21:20:58 GMT
More putting back together this afternoon Swingarm Masking and stoppers out New bushes First one in Changed to Hex nut to get further in But cant get any further
|
|
|
Post by buster on Dec 20, 2020 9:54:49 GMT
will a couple of sockets do it? one thats the same diameter as the female part of the swinging arm and one at the other side the same diameter as the out part of the bush? and probably a longer bolt to draw them into position
|
|
|
Post by BritPete on Dec 20, 2020 13:17:23 GMT
Thanks Buster
|
|
|
Post by BritPete on Dec 20, 2020 13:19:38 GMT
That's the swingarm almost ready to go back on One of the grease nipples is blocked I think as it would not grease up Feels good to be rebuilding although only small parts
|
|
|
Post by buster on Dec 20, 2020 15:18:47 GMT
is the tip on your grease gun adjusted correctly for those nipples? it can be a bit fiddly to get them on so that they actually push grease into the nipple
|
|
|
Post by BritPete on Dec 20, 2020 15:51:54 GMT
is the tip on your grease gun adjusted correctly for those nipples? it can be a bit fiddly to get them on so that they actually push grease into the nipple Off side greased up Nearside took no grease
|
|
|
Post by CTB on Dec 20, 2020 16:43:52 GMT
Good read Pete and Buster, I’ve got this to do on rusty so good tips.
|
|
|
Post by BritPete on Dec 20, 2020 17:13:30 GMT
Good read Pete and Buster, I’ve got this to do on rusty so good tips.
|
|