|
|
Post by BritPete on Mar 30, 2021 19:17:05 GMT
Has anyone got a spare rubber that fits the rear of the 400 Headlight as below - Happy to pay reasonable cost  |
|
|
|
Post by comstar on Mar 30, 2021 21:08:41 GMT
Is that part number correct?
|
|
|
|
Post by comstar on Mar 30, 2021 21:12:36 GMT
I think it's 422 in the middle.
If so Dave Silver has five in stock (if seeking new).
|
|
|
|
Post by johnfcbn44dx on Mar 30, 2021 21:53:03 GMT
Check all boxes in reach, found two light rubbers but they don't look like that one. (So I will probably need to get one sometime, as I know one of the lights I have for the 250s is a 400 unit with a 35/35W 40% more light philips bulb!).
CMS have some as well, but they have in addition to the postage contribution (14 Euro min before?), an extra charge for UK of 2% + £11.50... so not so good for small orders.
|
|
|
|
Post by BritPete on Mar 31, 2021 6:55:10 GMT
Ordered from Silvers
They are in the US warehouse so will take a week or so
Thanks all, I did check silvers but old age means I cannot read part numbers correctly now
|
|
|
|
Post by johnfcbn44dx on Mar 31, 2021 8:53:44 GMT
Ordered from Silvers They are in the US warehouse so will take a week or so Thanks all, I did check silvers but old age means I cannot read part numbers correctly now Me to 1 x 33180-422-003, and, as they are in the US, another one of those 1/2" master cylinders to use on my 250s once built.. Probably will come on the same transport.. |
|
.jpg?width=1920&height=1080&fit=bounds)
