|
|
Post by davefirestorm on Feb 5, 2022 11:35:22 GMT
Need couple of lugs for side panels anyone know a source to purchase from pleaseš
|
|
|
|
Post by BritPete on Feb 5, 2022 18:52:53 GMT
Need couple of lugs for side panels anyone know a source to purchase from pleaseš DFS up to no good! |
|
|
|
Post by davefirestorm on Feb 5, 2022 19:18:37 GMT
Need couple of lugs for side panels anyone know a source to purchase from pleaseš DFS up to no good! Not at all BPš couple of lugs on me 250 were detached on each panel I bonded them back on but now another has become detached and this one is rubberš aware that the lugs used to be available but canāt track them down.Having my paintwork ārevitalisedā so time to sort lugs.Iāve sold many perfect panels on wish Iād kept a coupleš„² |
|
|
|
Post by grahamb on Feb 5, 2022 19:22:42 GMT
Hi
"Bruce the Fish" was the chap who used to sell them on the old site.
|
|
|
|
Post by davefirestorm on Feb 5, 2022 21:30:46 GMT
Hi "Bruce the Fish" was the chap who used to sell them on the old site. Yes I remember this guy also another member whoād 3d printed some.Itās the round ones I want might have go at making some on lathe |
|
|
|
Post by grahamb on Feb 5, 2022 21:53:59 GMT
Hi "Bruce the Fish" was the chap who used to sell them on the old site. Yes I remember this guy also another member whoād 3d printed some.Itās the round ones I want might have go at making some on lathe This shows as his Web site .... www.goldenarrow.me.uk |
|
|
|
Post by davefirestorm on Feb 5, 2022 22:21:11 GMT
Interestingš
|
|
|
|
Post by johnfcbn44dx on Feb 5, 2022 23:15:26 GMT
Yes I remember this guy also another member whoād 3d printed some.Itās the round ones I want might have go at making some on lathe This shows as his Web site .... www.goldenarrow.me.ukI have some of the round 3D printed ones, I was going to try them and give a review, but ran out of summer... |
|
|
|
Post by davefirestorm on Feb 7, 2022 18:29:13 GMT
Lugs sorted,CTB kindly gave me a coupleš I will replicate a few from nylon bar on me lathe for future emergencyās š
|
|
|
|
Post by grahamb on Feb 7, 2022 19:03:08 GMT
Lugs sorted,CTB kindly gave me a coupleš I will replicate a few from nylon bar on me lathe for future emergencyās š Hi. How do you intend fixing the Nylon lugs to the panel ? |
|
|
|
Post by davefirestorm on Feb 7, 2022 19:14:42 GMT
Iāve had success using a Superglue bought online think itās called āPowerbondā being precise where you stick it initialy letting it cure then put some round base and add baking powder repeating few times till it builds up to reinforce the base it sets rock hard
|
|
