|
Post by cascai on Mar 23, 2024 13:21:22 GMT
|
|
|
Post by johnfcbn44dx on Mar 23, 2024 15:34:55 GMT
yeah they are to expensive for all but one of my bikes. I make them up from this stuff www.ebay.co.uk/itm/265191434376+G5 rapid epoxy www.ebay.co.uk/itm/312202236022+Thin Glass Cloth additionally use hylomar exhaust assm. paste when fitting Put some cut duct tape strips x 2 about 10mm wide, stick round template exhaust 15mm apart, so ends flare slightly, Wrap exhaust end in cling film or silicone grease Cut HT wrap to size hold in place with elastic bands, put plenty of epoxy on a thin bit of glass cloth and put over the joint (about half way round) and some epoxy all round the middle 15mm of the now circular wrap. let set. Should have made a video, hard to explain Start-up cost is about the price of 3 genuine, but enough to make lots! and I have the epoxy and Glass light weight WR for doing other stuff anyway Reminds me better order more medical gloves
|
|
|
Post by cascai on Mar 23, 2024 16:03:31 GMT
Thanks mate
|
|