|
Post by The Great High Lord Beer on May 18, 2021 6:57:24 GMT
No problem, I'll be in the workshop in the next couple of days 👍
|
|
|
Post by The Great High Lord Beer on May 18, 2021 17:43:10 GMT
Sir Buster, been out to the garage to measure up and oh dear, the bush is missing, where did it go, who knows, anyway the ID is obvious but I do require length and OD, measuring the rubber is not ideal, to be honest I could just go with it, but might as well be spot on.
In addition now I require said part I plan to make the bush and washer as one, not sure if the original bolt has a captive washer, but I have neither so mine will be one piece, not sure what the OD of the original washer is but around 25mm looks ok unless you or someone knows the correct measurement, again knocking something up that does the job is easy enough but might as well be accurate, verniers out gentlemen 👍
|
|
|
Post by buster on May 18, 2021 19:05:26 GMT
I think I'v got one I can measure, I'll pick it up tomorrow after work.
looking on cms its a flange head bolt plus a washer
|
|
|
Post by The Great High Lord Beer on May 18, 2021 19:15:34 GMT
Cheers Sir buster, I'll have them knocked up quick sharp and sent out 👍🍺
|
|
|
Post by andy1kenobe on May 18, 2021 21:31:24 GMT
If it's the metal sleeve in here then I have one here for measurements It's off the Black Pig, which is missing the bolt and washer to hold it on!
|
|
|
Post by buster on May 19, 2021 5:46:05 GMT
great stuff andy, thanks for the info
|
|
|
Post by andy1kenobe on May 19, 2021 7:51:29 GMT
great stuff andy, thanks for the info No problem. I just happened to have it next to the laptop wondering if I should replace the rubber as it is a little bit perished. It's usable so if a better one comes along at reasonable price I might change it.
|
|
|
Post by The Great High Lord Beer on May 19, 2021 17:21:17 GMT
Sir buster, is this OK, machined as described above with 25mm washer bit x 2mm thick, the rest as Sir Kenobes sizes, apart from bore is 8.1mm as only had an 8 or 8.5mm drill, threads on a bolt as usually a tenth or two under so shouldn't be a problem. I'll machine yours tomorrow if all OK 👍
|
|
|
Post by The Great High Lord Beer on May 20, 2021 17:57:57 GMT
Sir Buster, 2 x bush/washer thingys as requested.
|
|
|
Post by terryc on May 20, 2021 19:26:58 GMT
what a grand idea saves a lot of playing "hunt the washer " under the bike
|
|
|
Post by buster on May 21, 2021 7:37:40 GMT
sorry, only just seen this, yep they look great, I'll probably go with an after market stainless bolt so should be fine
|
|
|
Post by buster on May 25, 2021 18:55:10 GMT
things of wonderful beauty, thankyou Lord Beer
|
|
|
Post by The Great High Lord Beer on May 25, 2021 18:59:15 GMT
You are most welcome good Sir, happy to be of service 👍🍺
|
|