|
|
Post by BritPete on Mar 20, 2021 19:35:28 GMT
I can find the Torque setting for the rear sprocket in the Honda Manual, 43 to 51 ft-lbs Cannot find a Torque setting for the 16 tooth sprocket on the engine - any one know what it should be  |
|
|
|
Post by The Great High Lord Beer on Mar 20, 2021 20:06:01 GMT
How odd, can't find anything in my manual on it either, I must have tightened it and given it four Lord Beer unnnghhg ya bastard* on the bar, tight but not stupidly so.
*Lord Beers standard scale of torque settings 1-5
|
|
|
|
Post by buster on Mar 20, 2021 20:16:35 GMT
m6 bolt in dry steel with a 10mm head (assuming 8.8 tensile strength) 8 ft/lb
|
|
|
|
Post by johnfcbn44dx on Mar 20, 2021 20:32:03 GMT
Just put a dab of low strength lock on them or a dab of paint as an anti-vibration medium. torque not critical as soon as the plate is attached to the side of the sprocket and the m6 bolt is fully home...
|
|
|
|
Post by The Great High Lord Beer on Mar 20, 2021 20:52:58 GMT
How odd, can't find anything in my manual on it either, I must have tightened it and given it four Lord Beer unnnghhg ya bastard* on the bar, tight but not stupidly so. *Lord Beers standard scale of torque settings 1-5 Of course, 2 x M6 an a Superdream, not a central bolt, beer fog, follow the advice of sir johnfcbn44dx, use not the scale of unnnghhg. |
|
