|
|
Post by BritPete on Mar 28, 2021 19:53:27 GMT
|
|
|
|
Post by johnfcbn44dx on Mar 28, 2021 22:08:04 GMT
Yes, perhaps...   This is the right hand silencer that previously lived on my CB250NA, until it's system was renewed, and it's system was cascaded to the CB400NC, ex genuine down pipes, in place of the 2 into one when I bought the 400. (it is rotten inside now, I think it is the chrome holding it together) I cant remember if I cut the silencers or they were like that when removed from the 250, as my main issue was after introducing pattern down pipes was the (pattern) collector box was about 5mm to far back and getting it bolted to the engine was a problem. Oh what shiny front engine bolts you have, whoever re-assembled my 400 after powder coating, just did no care if there was no zinc plate left, or to use black bolts. Had everything back together after sorting the centre stand operation and a general service of it, decided to adjust it, put the spanner to release the locknut, it seemed easy until half the sheared adjuster bolt fell on the ground! Contrast... 
Oh the "German" main stand spring Arrgt. whilst I've got the pic hand (of course it will be familiar to you already)  |
|
|
|
Post by comstar on Mar 29, 2021 3:45:25 GMT
Quick tip.
Don't run it with the bubble wrap attached Pete.
|
|
|
|
Post by grahamb on Mar 29, 2021 11:36:14 GMT
HI
also be aware of where the centre stand folds and touches the silencer rubber stop .
|
|
|
|
Post by BritPete on Mar 29, 2021 19:41:02 GMT
Things got worse today Patterns downpipes dont line up This is the pattern down pipes clamped up on the barrel  This is the NOS pipes  bought the pattern set over 3 years ago  |
|
|
|
Post by johnfcbn44dx on Mar 29, 2021 21:11:10 GMT
Things got worse today Patterns downpipes dont line up This is the pattern down pipes clamped up on the barrel This is the NOS pipes bought the pattern set over 3 years ago Wow,they are worse than the pattern down pipes I used, they were just wanted to push the collector towards the rear. but their alignment wasn't as far out.... Much prefer the originals, apart from the Mufflers (& except the price  ) |
|
.jpg?width=1920&height=1080&fit=bounds)
)