|
Post by comstar on Sept 25, 2021 4:35:13 GMT
Feast your eyes on these parts that I found just now after a garage clearout I'll explain the rules of the game in a bit. So let's have a little fun.
|
|
|
Post by comstar on Sept 25, 2021 4:58:51 GMT
So I think there are a total of fifteen parts in the picture. The end winner will provide a good description of all of these parts and a relevant Honda part number. Even if you have a shot at a description or part numbers of each individual item then this will also be appreciated. (It's just for fun). Good luck and thank you to anyone who wants to take part.
|
|
|
Post by johnfcbn44dx on Sept 25, 2021 10:55:29 GMT
I'll kick off with the top item;-
Exhaust collector box, could be a few different part numbers, Il guess at a later one, of Part number 18310-MC0-670 ( superceded by
Part number 18310-KB0-000), PRECHAMBER COMP..
|
|
|
Post by buster on Sept 25, 2021 13:14:45 GMT
harder than it looks this, I thought I was being a smart arse with part number 45500 MA4 672 for the master cylinder but I think thats wrong as the part number is for a two screw cap?
cdi could be various part numbers, I'll give 30400 443 005 a shot. more easily identified by a couple of things, it will probably have TIA01-20 on the front (useful for identifying hitachi/400/450 models) the four wires to the bigger block connector (pink,green,light blue,brown) but worth bearing in mind that 400 auto models also had four wires but ran a denso set up
|
|
|
Post by buster on Sept 25, 2021 13:21:55 GMT
I'll try 45500 470 671 for the master cylinder, looks like a one year only part before it became two screw?
|
|
|
Post by johnfcbn44dx on Sept 25, 2021 18:28:49 GMT
So many possibilities for the master cylinder, I'll go with 45500-442-772 which is the NA 250 1980, and I'll go with 45100-413-752 for the caliper, which would be a later in batch run, 1980 250. Assuming the m/cyl and caliper are similar source.....
|
|
|
Post by tucksie on Sept 25, 2021 20:21:08 GMT
I’ll try the guide upper tube, in between the brake caliper and oil filter. Part number is 50731-413-000, I think
|
|
|
Post by comstar on Sept 26, 2021 5:17:26 GMT
Please correct if wrong but I think so far we have some successful guessers. Here goes: John - Collector and master cylinder Buster - CDI Tucksie - cable guide Well done so far chaps.
|
|
|
Post by bawbag on Sept 29, 2021 15:39:54 GMT
Bottom image header left going with 18420443611
|
|
|
Post by comstar on Oct 3, 2021 5:26:52 GMT
Bottom image header left going with 18420443611 Very very very close.
|
|
|
Post by buster on Oct 3, 2021 7:57:21 GMT
I'll try what I think is a carb overflow/drain off tube 950013 548 040
|
|
|
Post by johnfcbn44dx on Oct 3, 2021 8:35:16 GMT
Bottom image header left going with 18420443611 Very very very close. In that case, how about PIPE, Right .EXHAUST, 18320443611
|
|
|
Post by comstar on Oct 3, 2021 19:49:32 GMT
Spot on both.
|
|