|
Post by BritPete on Nov 6, 2022 13:01:42 GMT
I can’t remember how many times JJ has mentioned spark testers. I bought a couple and this is how I made them work for the SD As you can see these are designed for leaving the screw of part on the spark plug so First thing drill a shallow 2.5mm hole in the top of the tester - file the surface flat first tap to 3mm, can’t get much thread, then file a 3mm screw cone shared about 2mm and screw it in the threaded hole until tight I then soldered the joint to give it more strength - 25 watt iron cut off the screw head and made a cap from a piece of brass subs drilling and threading it to 3mm screwed it on and soldered the top to use you need to screw a cap onto the plug on the bike connect the tester and bobs your uncle
|
|
|
Post by BritPete on Nov 6, 2022 13:02:12 GMT
Sorry for the wonky photos
|
|
|
Post by comstar on Nov 7, 2022 3:45:25 GMT
Sorry for the wonky photos Not a problem. After a few JD and cokes they look spot on.
|
|