|
|
Post by McLellan on Nov 10, 2020 19:45:13 GMT
And advice on how I can go about getting a replacement key guys?
Or is it a drill out job?
Thanks
|
|
|
|
Post by BritPete on Nov 10, 2020 20:24:10 GMT
And advice on how I can go about getting a replacement key guys? Or is it a drill out job? Thanks Suspect a drill out job  |
|
|
|
Post by terryc on Nov 11, 2020 6:13:12 GMT
I'm in the same boat ,I'll get round to it eventually
|
|
|
|
Post by buster on Nov 11, 2020 6:50:03 GMT
I'm not 100% on this but isnt it held in with a little rivet? if you take that out (probably drill) then you should be able to get the lock barrel out, might be tricky wirh no key though
|
|
|
|
Post by comstar on Nov 11, 2020 7:01:40 GMT
I'm not 100% on this but isnt it held in with a little rivet? if you take that out (probably drill) then you should be able to get the lock barrel out, might be tricky wirh no key though Just seen this... Yes drill out job. Rivet and little fat washer secures the lock in place....but those are only designed to stop it popping out when the key is actually evident. I have drilled loads of these out. Quite easy. You'll just need to source a replacement lock barrel and keys first, loads on ebay - O.E is Neimann (Germany). Honestly it is easy peasy. |
|
|
|
Post by Chris P Duck on Nov 11, 2020 7:22:21 GMT
Is the key broken off inside or key missing totally ? ? ? ?  |
|
|
|
Post by BritPete on Nov 11, 2020 8:12:52 GMT
Is the key broken off inside or key missing totally ? ? ? ? With a bit of luck as the key is in this take out the rivet and washer and the barrel should come out I would WD40 that barrel up and use a dentist pick to get the key out |
|
.jpg?width=1920&height=1080&fit=bounds)
