|
Post by buster on Mar 19, 2023 13:28:40 GMT
just messing around with various parts at the moment, got a cb450 nighthawk sprocket carrier and cush rubbers, all seems to fit nicely but cant check the sprocket offset until I get the right spacer, as you can see standard superdream doesnt fit
|
|
|
Post by johnfcbn44dx on Mar 20, 2023 0:11:08 GMT
|
|
|
Post by buster on Mar 20, 2023 5:44:58 GMT
that looks like the part in question, brilliant info john, thanks
|
|
|
Post by buster on May 11, 2023 9:26:09 GMT
more messing about, I think I can get the engine in and straight but clearance for the exhausts is going to be tight. need a front sprocket on to measure properly. also got the wrong cylinder head with the motor, easily available though, the power valves are missing from the right cylinder they could be harder to track down. rear of the motor still needs to come up a bit but plenty of room to play with once I cut a pipe guide off the back of the motor
|
|
|
Post by buster on May 12, 2023 8:38:34 GMT
hmmm, just having a brew and looked at the angle of the rear shocks. doesnt look right to me, so out with the tape measure and it turns out the cm400 swinging arm is actually more likely to be cm450/cb450sc. its longer and the shock mounts are further back . happily I think I have a spare SD one
|
|
|
Post by buster on Jul 22, 2023 8:11:16 GMT
tracked down my SD swinging arm so offered the boomerang up to it for a bit of a look and the nighthawk sprocket carrier looks like a goer to me
|
|