|
Post by shuttlespanker on Mar 22, 2023 7:47:22 GMT
Good morning all, in my thread regarding my Superdream non runner project, I have spoken about doing some powder coating on various parts Here is a short video showing the actual coating process Once the parts have been coated, the parts need to be baked at 180°c for 10 minutes, or until shiny all over, by whatever means necessary, an oven is best, but, as can be seen in the following pics, I used a gas heater and an electric heater on each side of the parts As with painting, the more preparation work put in before coating, the better the finish The parts in the video and picture are the seat release catches
|
|